Features

• 前板上四个麦克风/线XLR输入
• 后板上两个音频输出接线端子
• 麦克风与线路音频信号转换为Dante Network
• 每个XLR输入可选麦克风或线路
• 每个麦克风XLR输入可切换48V幻象电源
• 每个XLR输入可调麦克风/相位增益从-20dB到+20dB
• Dante Network两个音频信号输出
• 平衡或不平衡信号输出
• 不需要特殊软件
• DAC和ADC的24Bit高分辨率
• 以太网供电(PoE)或24VDC电源
• 为麦克风提高质量的前置放大器
• 出色音质和低噪音
• 尺寸: 116mm x 114.5mm x 53.1mm (WHD)

Specifications

    Mic/Line Inputs to Dante Network 

* Inputs: XLR (female) x 4

* Gain range: -20 ~ +20 

* Input Impedance: > 2.5 kΩ (MIC); > 5 kΩ (LINE)

* Phantom Power: 48 VDC, switchable

* Frequency Response: 20 Hz ~ 20 KHz (±0.5 dB)

* THD+N: < 0>

* CMRR: > 65 dB 

    Dante Network to Line Outputs

* Outputs: 2, Balanced/Unbalanced, detachable terminal block 

* Output Level: +4 dBu (nominal) balanced; 

                        -10 dBV (nominal) unbalanced, 
                         selectable

* Output Level (maximum): +24 dBu balanced; +10 dBV unbalanced 

* Output Impedance: 150 Ω Balanced; 2.5 kΩ Unbalanced 

* Frequency Response: 20 Hz ~ 20 kHz (±0.5 dB)

* THD+N: < 0>

* Noise: < -80 dB (below +4 dBu or -10 dBV); 

             < -100 (below +24 dBu)

    Dante Network

* Transmitters/Receivers: 2/2

* Transmission rate: 100 Mbps

* Resolution: 16/24/32 Bit

* Sampling rate: 44.1 KHz, 48 KHz.

* Dante interface: RJ45 jack 

* Power Connections : 2 Pin Euro Terminal

* Power Requirement: 24 Vdc @ 180 mA plus connected phantom loads, or PoE

* Dimensions: 116mm(W) × 114.5mm(H) × 53.1mm(D) 

* Weight: 370g

Documents

DIC4323A Manual.pdf