Features

• 前板上两个麦克风/线XLR输入和输出
• 前板上一个迷你插孔输出
• 后板上两个音频输出接线端子
• 麦克风与线路音频信号转换为Dante Network
• 每个XLR输入可选麦克风或线路
• 可切换48V幻象电源，用于麦克风XLR输入
• 每个输入信道可调麦克风/增益从-20dB增加到+20dB
• Dante Network两个音频信号输出
• 平衡或不平衡信号输出
• 不需要特殊软件
• DAC和ADC的24Bit高分辨率
• 以太网供电(PoE)或24VDC电源
• 为麦克风提高质量的前置放大器
• 出色音质和低噪音
• 尺寸: 87mm x 87mm x 53.1mm (WHD)

Specifications

    Mic/Line Inputs to Dante Network 

* Inputs: XLR (female) x 2, Stereo Mini-jack (L, R) 

* Gain range: -20 ~ +20

* Input Impedance: >2.5kΩ (XLR MIC); >5kΩ (XLR LINE); >50kΩ (Mini-jack) 

* Phantom Power: 48 VDC, switchable

* Frequency Response: 20 Hz ~ 20 KHz (± 0.5 dB)

* THD+N: < 0>

* CMRR: > 65 dB 

    Dante Network to Line Outputs

* Outputs: 2, Balanced/Unbalanced, detachable terminal block

                 1, Unbalanced, Mini-jack (L, R)

* Output Level: +4 dBu (nominal) balanced; 

                        -10 dBV (nominal) unbalanced, 

                        selectable

* Output Level (maximum): +24 dBu balanced; +10 dBV unbalanced 

* Output Impedance: 150 Ω Balanced; 500kΩUnbalanced

* Frequency Response: 20 Hz ~ 20 kHz (± 0.5 dB)

* THD+N: < 0>

* Noise: < -78 dB (balanced, below +4 dBu); 

             < -98 (balanced, below +24 dBu); 

             < -75 dB (unbalanced, below -10 dBV)

    Dante Network

* Transmitters/Receivers: 2/2

* Transmission rate: 100 Mbps

* Resolution: 16/24/32 Bit

* Sampling rate: 44.1 KHz, 48 KHz.

* Dante interface: RJ45 jack 

* Power Connections :2 Pin Euro Terminal

* Power Requirement: 24 Vdc @ 180 mA plus connected phantom loads, or PoE

* Dimensions: 116mm(W) × 114.5mm(H) × 53.1mm(D) 

* Weight: 360 g

Documents

DIC3533A Manual.pdf