PLA4 Series - Power Amplifier
PLA4 Series - Power Amplifier
PLA4 Series - Power Amplifier available with three distinct modules, offer exceptional flexibility in audio input options, making it suitable for a wide range of user needs.
* PLA4Li： 4 Channels LINE Input
* PLA4Di： 4 Channels DANTE Input
* PLA4DL： 2 Channels LINE Input + 2 Channels DANTE Input combination
* 150W x 4 output at 4 / 8 Ohm loads
* 300W x 2 output at 70V or 100V
* High efficient CLASS D technology
* Standby mode activated after 15 minutes of no signal and comply with Energy Star Power consumption limits of less than 0.5W
* Zone1 / Zone2 LED status:
Green: Active
Off: Standby mode
Red: Protect mode
* Terminal Block analog audio inputs (4 Channel input)
* Selection for Power-On mode
* Switch for High Pass Filter
* Remote STANDBY control
* Amplifier status output
* Protection: Short circuit, Overheating
* Optional accessory cards
* Built-in cooling fan
APPLICATION: Commercial Space, Restaurant, Shopping Mall, School, Conference Room, etc.
| Output Power (FTC Power, all channels driven) | 150W x 4, 8Ω RMS output, per channel @ 1 KHz 1 % THD 150W x 4, 4Ω RMS output, per channel @ 1 KHz 1 % THD 300W x 2, 70V @ 1 KHz 1 % THD 300W x 2, 100V @ 1 KHz 1 % THD |
| Burning test condition: | 1/8 Rated Power |
| Frequency Response: | 20 Hz - 20 KHz, +/- 2 dB @ 4Ω Load |
| Signal to Noise: | Greater than 90dB A WTD(20 Hz - 20 kHz) |
| Input Sensitivity: | 0.775V Balanced, Gain = Max |
| Input Impedance: | Greater than 10K, Balanced or Unbalanced |
| Maximum Input Level : | 5V - Balanced |
| High Pass Filter: | 80 Hz |
| Input Connectors: | 6 pin Euro Terminal x 2 |
| Remote Connectors: | 5 pin Euro Terminal x 1 |
| Output Connectors: | 4 pin Euro Terminal (4Ω/8Ω) x 2 2 pin Euro Terminal (70V/100V) x 2 |
| Power Requirements: | 100 - 240 VAC, 50 - 60 Hz |
| Power Consumption: | 1000W, Max |
| Dimensions: | 434mm x 44mm x 237mm (WxHxD) |
| Net Weight: | 3.12 Kg |
