Features

• Four Mic/Line XLR Inputs on Front Panel
• Terminal Block for Two Audio Outputs on Rear Panel
• Converts Mic or Line Audio Signals to Dante Network
• Mic or Line is Selectable for Each XLR Input
• Switchable 48V Phantom Power for Each Mic XLR Input
• Adjustable Mic/LIne Gain from -20 dB to +20dB for Each XLR input
• Two Audio Signal Outputs from Dante Network  
• Balanced or Unbalanced Signal Outputs
• High Resolution 24 Bit for DAC and ADC
• Power over Ethernet (PoE) or 24VDC power supply
• Provides High Quality of Preamplifier for Microphones
• Dimension: 116mm x 114.5mm x 53.1mm (WHD)

Specifications

    Mic/Line Inputs to Dante Network 

* Inputs: XLR (female) x 4

* Gain range: -20 ~ +20 

* Input Impedance: > 2.5 kΩ (MIC); > 5 kΩ (LINE)

* Phantom Power: 48 VDC, switchable

* Frequency Response: 20 Hz ~ 20 KHz (±0.5 dB)

* THD+N: < 0>

* CMRR: > 65 dB 

    Dante Network to Line Outputs

* Outputs: 2, Balanced/Unbalanced, detachable terminal block 

* Output Level: +4 dBu (nominal) balanced; 

                        -10 dBV (nominal) unbalanced, 
                         selectable

* Output Level (maximum): +24 dBu balanced; +10 dBV unbalanced 

* Output Impedance: 150 Ω Balanced; 2.5 kΩ Unbalanced 

* Frequency Response: 20 Hz ~ 20 kHz (±0.5 dB)

* THD+N: < 0>

* Noise: < -80 dB (below +4 dBu or -10 dBV); 

             < -100 (below +24 dBu)

    Dante Network

* Transmitters/Receivers: 2/2

* Transmission rate: 100 Mbps

* Resolution: 16/24/32 Bit

* Sampling rate: 44.1 KHz, 48 KHz.

* Dante interface: RJ45 jack 

* Power Connections : 2 Pin Euro Terminal

* Power Requirement: 24 Vdc @ 180 mA plus connected phantom loads, or PoE

* Dimensions: 116mm(W) × 114.5mm(H) × 53.1mm(D) 

* Weight: 370g

Documents

DIC4323A Manual.pdf