menu
  • ABOUT
  • NEWS
  • FEATURED
  • Products
    • Home Installation
      • Multi-Room Amplifier
      • Power Amplifier
      • Wifi/Bluetooth Amplifier Series
      • Media Player
      • Power Management
      • Solution Boxes
      • Speaker Selector
      • Speaker
    • Intelligent Conference
      • Pre-Amplifier
      • Power Amplifier w/Dante Interface
      • Power Amplifier
    • Public Address
      • Amplifier
      • Speaker Selector
      • Dante
      • CSP Transceivers
      • CSP Receivers
      • Solution Boxes
    • Pro Audio
      • DANTE
      • Mixer
      • Headphone Amplifier Series & GE Equalizers Series
      • Guitar Tool
      • Mini Mixer
      • Direct Box
      • Mic Preamp
      • Phantom Power Supplier
      • Other Solution
  • SERVICES
  • CONTACT
  • 簡體 繁體 english
DIC3533A(Dante)


Dante Interface Mic/Line


4 Inputs x 4 Outputs



DIC3533A(Dante)

Dante Interface Mic/Line

4 Inputs x 4 Outputs

ETHERNET-60PoE-60Dante-60MIC-60XLR-603.5 JACK-60
DIC3533A is a high quality Dante interface box for converting four Dante channels to Analogue Audio outputs, and four Analogue Audio inputs to Dante network.
Line Input/Output on the front panel accept Stereo or Mono signal by switches.

Features

• Two Mic/Line XLR Inputs and One Mini-jack Input on Front Panel
• Terminal Block for Two Audio Outputs on Rear Panel
• One Mini-jack Output on Front Panel
• Converts Mic or Line Audio Signals to Dante Network
• Mic or Line is Selectable for Each XLR Input 
• Switchable 48V Phantom Power for Each Mic XLR Input
• Adjustable Mic/LIne Gain from -20 dB to +20dB for Each Input Channel
• Stereo/Mono switch for Mini-jack Input and Output
• Four Audio Signal Outputs from Dante Network
• Balanced or Unbalanced Signal Outputs
• High Resolution 24 Bit for DAC and ADC
• Power over Ethernet (PoE) or 24VDC power supply
• Provides High Quality of Preamplifier for Microphones
• Dimension: 116mm x 114.5mm x 53.1mm (WHD)

Specifications

    Mic/Line Inputs to Dante Network 

* Inputs: XLR (female) x 2, Stereo Mini-jack (L, R) 

* Gain range: -20 ~ +20

* Input Impedance: >2.5kΩ (XLR MIC); >5kΩ (XLR LINE); >50kΩ (Mini-jack) 

* Phantom Power: 48 VDC, switchable

* Frequency Response: 20 Hz ~ 20 KHz (± 0.5 dB)

* THD+N: < 0>

* CMRR: > 65 dB 


    Dante Network to Line Outputs

* Outputs: 2, Balanced/Unbalanced, detachable terminal block

                 1, Unbalanced, Mini-jack (L, R)

* Output Level: +4 dBu (nominal) balanced; 

                        -10 dBV (nominal) unbalanced, 

                        selectable

* Output Level (maximum): +24 dBu balanced; +10 dBV unbalanced 

* Output Impedance: 150 Ω Balanced; 500kΩUnbalanced

* Frequency Response: 20 Hz ~ 20 kHz (± 0.5 dB)

* THD+N: < 0>

* Noise: < -78 dB (balanced, below +4 dBu); 

             < -98 (balanced, below +24 dBu); 

             < -75 dB (unbalanced, below -10 dBV)


    Dante Network

* Transmitters/Receivers: 2/2

* Transmission rate: 100 Mbps

* Resolution: 16/24/32 Bit

* Sampling rate: 44.1 KHz, 48 KHz.

* Dante interface: RJ45 jack 

* Power Connections :2 Pin Euro Terminal

* Power Requirement: 24 Vdc @ 180 mA plus connected phantom loads, or PoE

* Dimensions: 116mm(W) × 114.5mm(H) × 53.1mm(D) 

* Weight: 360 g



Documents

DIC3533A Manual.pdf