Features

• Provides Dante Interface for Four Inputs / Outputs
• Four Standard MIC or LINE Audio Channels Converts to Dante Network
• MIC/LINE selectable on Each Input
• Gain Control on Each Input
• Provides 48V Phantom Power for Each Condenser Microphone Input
• Accepts Balanced or Unbalanced Signal Inputs
• Each Audio Input Signal LED on Front Panel
• Each Audio Output Signal LED on Front Panel
• Four Balanced Audio Output Line Level from Dante Network
• High Resolution 24 Bit Converts Analog to Digital and Digital to Analog
• LEDs Indicate the Status for Power and Network Sync
• Powered by External 24VDC Power Supply
• Normal Operation with PoE Enable Network Switch

Specifications

    Dante Network to Line Level Outputs

* Outputs: 5P Detachable Terminal block,Balanced/Unbalanced 

* Output Level:   -10 dBu nominal

* Output Level:   +10 dBu Maximum

* Output Voltage:+20dBu (@ 0dB output gain)

* Output Impedance: 150 Ω balanced; 75 Ω unbalanced 

* Frequency Response: 20 Hz to 20 kHz (± 0.5 dB) 

* THD+N: < 0>

* Noise: <-75dB

* Crosstalk: < 85>

    Mic/Line Inputs to Dante Network 

Mic Inputs 

* Inputs :7 Pin Euro Terminal,Balanced

* Gain:  Condenser microphone :40 dB

* Dynamic microphone :60 dB

* Input Level for +4 dBu: -36 dBu (Condenser)

                                        -56 dBu (Dynamic) 

                                        -36 dBu(Maximum)

* Input Impedance: 40 Ω 

* Phantom Power: 48 V 

* Frequency Response: 20 Hz to 20 kHz (± 0.5 dB) 

* THD+N: < 0>

* Noise below +4 dBu: < -70 dB 

* CMRR: > 70 dB (50 Hz to 120 Hz) 

* Crosstalk: < 70>

Line Inputs 

* Inputs: 7 Pin Euro Terminal, Balanced

* Input Level for +4 dBu: +4 dBu (balanced); -10 dBV (unbalanced) 

* Input Impedance: >40 Ω 

* Frequency Response: 20 Hz to 20 kHz (± 0.5 dB) 

* THD+N: < 0>

* Noise below +4 dBu: < -75 dB 

* CMRR: > 60 dB (50 Hz to 120 Hz) 

* Crosstalk: < 75>

                    < 70>

* Headroom above +4 dBu: > 18 dB 

    Dante channel

* Transmitters/Receivers: 4/4

* Transmission rate: 100 Mbps

* Resolution:  16/24/32 Bit

* Sampling rate: 44.1 kHz, 48 kHz.

* Dante interface: RJ45 jack 

* Power Connections :2 Pin Euro Terminal, Power Jack 

* Power Requirement: 24 Vdc @ 180 mA plus connected phantom loads, or PoE 

* Dimensions: 146mm(W) × 41.6mm(H) × 96.9mm(D)

* Weight: 0.7Kgs

Documents

DIC4E43A User Manual.pdf