Features

• Two Mic/Line Terminal Block Inputs on Rear Panel.
• Converts Mic or Line Audio Signals to 2 Channels Dante Network.
• Switchable Mic/Line/48V Phantom Power for Each Input.
• Terminal Block for Two Audio Outputs on Rear Panel
• Two Audio Signal Outputs from Dante Network.
• Converts 2 Channels Dante Signals to Two Line Terminal Block Outputs.
• Balanced or Unbalanced Signals for Inputs and Outputs.
• Adjustable Gain Control for Output Level on Rear Panel.
• LED indicators for Signal Level and Clip of Each Input Channel on Front Panel.
• Adjustable Gain from -20 dB to +20dB for Each Input Channel on Front Panel.
• LED indicators for Signal Level of Each Output Channel on Front Panel.
• Power over Ethernet (PoE) or 24VDC power supply
• LED Indicators Show the Status of Power and Network.
• High Resolution 24 Bit for DAC and ADC
• Provides High Quality of Preamplifier for Microphones.
• Dimension: 143mm x 45mm x 93mm (WHD)

Specifications

    Dante Network to CSP and Line Outputs

CSP outputs

* Outputs: RJ45 jack x 3 

* Frequency Response: 20 Hz to 20 kHz (± 0.5 dB) 

* THD+N: < 0>

* Noise: <-85dB 

* Crosstalk: < 80>

Aux Line Output

* Output: 3P Detachable Terminal block

* Output Level: +4 dBu 

* Output Voltage: +20dBu (@ 0dB output gain)

* Output Impedance: 150 Ω balanced; 75 Ω unbalanced 

* Frequency Response: 20 Hz to 20 kHz (± 0.5 dB) 

* THD+N: < 0>

* Noise: <-75dB 

* Crosstalk: < 85>

CSP and Mic/Line Inputs to Dante Network 

CSP Input 

* Input: RJ45 jack x 1 

* Frequency Response: 20 Hz to 20 kHz (± 0.5 dB) 

* THD+N: < 0>

* Noise below +4 dBu: < -75 dB 

* CMRR: > 90 dB (50 Hz to 120 Hz) 

* Crosstalk: < 80>

Aux Mic Input

* Input: 3P Detachable Terminal block, Balanced 

* Gain:  Condenser microphone : 40 dB

* Dynamic microphone : 60 dB

* Input Impedance: 2.5K Ω 

* Phantom Power: 48 V

* Frequency Response: 20 Hz to 20 kHz (± 0.5 dB) 

* THD+N: < 0>

* Noise below +4 dBu: < -70 dB 

* CMRR: > 70 dB (50 Hz to 120 Hz) 

* Crosstalk: < 70>

Aux Line Input 

* Input: 3P Detachable Terminal block, Balanced/Unbalanced 

* Input Level for +4 dBu: +4 dBu (Balanced); -10 dBV (Unbalanced) 

* Input Impedance: > 20K Ω 

* Frequency Response: 20 Hz to 20 kHz (± 0.5 dB) 

* THD+N: < 0>

* Noise below +4 dBu: < -75 dB 

* CMRR: > 60 dB (50 Hz to 120 Hz) 

* Crosstalk: < 75>

                   < 70>

* Headroom above +4 dBu: > 18 dB 

    Dante channel

* Transmitters/Receivers: 4/4

* Transmission rate: 100 Mbps

* Resolution:  16/24/32 Bit

* Sampling rate:  44.1 kHz, 48 kHz.

* Dante interface: RJ45 jack  

* Power Connections : 2 Pin Euro Terminal, Power Jack 

* Power Requirement: 24 Vdc @ 180 mA plus connected loads, or PoE 

* Dimensions: 146mm(W) × 41.6mm(H) × 96.9mm(D) 

* Weight: 0.56 Kgs

Documents

DIC2R43A Manual - McLELLAND.pdf