簡體 繁體 english menu
  • ABOUT
  • Products
    • Home Installation
      • Amplifier
      • Solution Boxes
      • 2.4G Wireless System
      • Power Management
      • Speaker Selector
      • Speaker
    • Public Address
      • Speaker Selector
      • Amplifier
      • Matching Transtormer
      • Solution Boxes
      • Speaker
      • Gooseneck Microphone
    • Discontinued
      • Amplifier
      • Crossover
      • Equalizer
      • Processor
      • Power Conditioner
      • Speaker
      • DJ Mixer
      • Gooseneck Lights
    • Pro Audio
      • Amplifier
      • Mixer
      • Headphone Amplifier
      • Guitar Tool
      • Mini Mixer
      • Direct Boxes
      • Mic Preamp
      • Phantom Power Supplie
      • Other Solution
  • NEWS
  • SERVICES
  • CONTACT
NVPD-104P



NTSC/PAL Video Distribution


Amp - 1x4BNC




NVPD-104P

NTSC/PAL Video Distribution

Amp - 1x4BNC

The McLelland NPVD-104P is a video distribution amp which designed for most security video system, home audio and professional sound installations. It provides one input, 4 distributed outputs which designed to connect to a 75 ohm terminated load, and one loop-through output. Source-terminated distributed outputs do not require termination if unused, you also can adjust the video level from -1~+7dB for using the gain potentiometer on the top panel.

 

Features

Specifications

•Input : 1 K Ohm bridging 75 Ohm line
•Gain : -1dB to +7dB (0.9 to 2.25 V p-p,adjustable)
•Outputs : 1 Loop out from input signal;4 amplified outputs
•Output Level : 1V p-p into 75 Ohm
•Frequency Response : 10Hz to 10MHz (+/- 0.2dB)
•Noise : < -70dB below (1 V p-p)
•Output Isolation : > 40dB
•Differential Phase : 0.1degree (measured at 10% and 90 APL)
•Connector Type : BNC, PHONO, or Type F
•Power requirement : DC 12-24 Vac@60mA,Ground-referenced
•Dimensions (WxDxH): 6.5” x 2.4” x 1.65” (165 x 60 x 42 mm)

Documents

NPVD-104P