簡體 繁體 english menu
  • ABOUT
  • Products
    • Home Installation
      • Amplifier
      • Solution Boxes
      • 2.4G Wireless System
      • Power Management
      • Speaker Selector
      • Speaker
    • Public Address
      • Speaker Selector
      • Amplifier
      • Matching Transtormer
      • Solution Boxes
      • Speaker
      • Gooseneck Microphone
    • Discontinued
      • Amplifier
      • Crossover
      • Equalizer
      • Processor
      • Power Conditioner
      • Speaker
      • DJ Mixer
      • Gooseneck Lights
    • Pro Audio
      • Amplifier
      • Mixer
      • Headphone Amplifier
      • Guitar Tool
      • Mini Mixer
      • Direct Boxes
      • Mic Preamp
      • Phantom Power Supplie
      • Other Solution
  • NEWS
  • SERVICES
  • CONTACT
RVS-401



Sequencing Video


Switcher - 4x1 BNC




RVS-401

Sequencing Video

Switcher - 4x1 BNC

The RVS-401 is a desktop unit style video switch solution box, which designed to accept four video input signals and control display-sequence switching from video sources such as cameras and video servers into a single output. It features the Local / Remote Control and four pushbuttons with LED indicators corresponding to each video input and the rate control on the front-panel for setting the number of sequences, steps per sequence, and dwell time. The RVS-401 features the video input & loop-through output jack of the four source signal channel; it also provides the terminator connector on the rear panel if 75 Ohm termination of the input signal is required.

Features

Specifications

•Input Impedance : 5k Ohm bridging 75 Ohm line
•Gain : Unity, (75 Ohm terminated input, 75 ohm terminated output)
•Load Impedance : 75 ohm
•Outputs : 4 Loop out from *input signals, 1 amplified output
•Operating Signal Level : 0.5 to 1.0 V p-p
•Frequency Response : 10 Hz to 10 MHZ (+/-0.35dB)
•Noise : < -70 dB below 1V p-p
•Crosstalk : < 55 dB
•Off Attenuation : >65 dB
•Differential Gain : 0.1%
•Differential Phase : 0.3 degree
•Connector Type : BNC, gold plated
•External Control Outputs: 4@ 50 mA, Open- collector to ground
•Power Requirement : DC 12-24 Vac @110mA, Ground-referenced
•Dimensions (WxDxH): 6.5” x 2.4” x 1.65” (165 x 60 x 42 mm)

Documents

RVS-401