•Base crossover modes: 2x2 way, 2x3 way, 2x4 way, 4+4 way, 5+3 way and 6+2 way
•Powerful DSP based loudspeaker processors
•The sampling rate of 96KHz means minimal filtering providing a bandwidth over 20KHz
•Units also offer “Source” for free assign signal, which allows completely flexible routing of any output from any combination of inputs.
•Each input has a gain control, 1500 millisecond delay, 31 band graphic equalizer, 10 band multi-type filter
•The multi-type filter bands have a large selection of different filter types available, including parametric equalizer, high-pass/low-pass with variable-Q , notch, all-pass, band-pass
•Each output has a gain control, 1500 millisecond delay, 10 band multi-type filter
•The multi-type filter bands have a large selection of different filter types available, including parametric equalizer, high/low shelving, high-pass/low-pass with variable-Q , notch, all-pass, band-pass. The independent high-pass and low-pass filters offer slopes of up to 48dB/Octave. polarity switching and, additionally, a fully featured limiter
•Channel link control available.
•Security lock-out is available for all controls.
•Extend simple remote protocol available
•Three parameter encoders provide a familiar and intuitive control
•LCD display on the front panel
•Monitoring the level of inputs and outputs, with Mute/Edit buttons allowing quick set up and adjustment
•The processor is provided with PC remote control software for full system set up and management via RS232/RS485
Inputs: (4) electronically balanced
Impedance: > 10K ohms
CMRR: > 75dB, 50Hz ~ 10KHz
Outputs: (8) electronically balanced
Source Imp: < 60ohms
Min. Load: 600ohms
Max. Level: +15dBm
Digital Audio Sample Rate: 96KHz
Frequency Response: +/- 0.5dB, 20Hz ~ 20KHz
Distortion: < 0.005% @1KHz, +15dBm
ADC Dynamic Range: > 114dB, 20Hz ~ 20KHz (A-Weight)
DAC Dynamic Range: > 114dB, 20Hz ~ 20KHz (A-Weight)
Propagation Delay: 0.41mS
•Input Channel Parameter
Delay: Max. 1500ms
Gain: -40dB to +6dB (0.1dB steps)
EQ: 31 Bands
Output Channel Parameter
Gain: -40dB to +15dB (0.1dB steps)
Delay: Max. 1500ms
Signal Route: A, B, C, D
Filter Q'ty: 10 per Input, 10 per Output.
Freq. Range: 20Hz ~ 20KHz, 1/36 Octave steps
Gain: -30dB to +15dB (0.1dB steps)
Filter Q/BW: 0.0078 to 2.52 Octave (Q=0.5 to 128)
Filter Type: Parametric Equalizer, HP/LP Variable Q, Bandpass, Notch, Allpass
Freq. Range: 20Hz ~ 20kHz, 1/36 Octave steps.
Slope: 6/12/18/24/36/48 dB/Octave.
Type: Butterworth, Linkwitz-Riley, Bessel.
Threshold: -10dB ~ +15dB, 1dB steps.
Attack time: 0.3ms ~ 90mS.
Release time: 0.1 ~ 2.0 second.
•Power Voltage: AC 110V/60Hz, AC 220V 50Hz
•Power Consumption: < 20 watts
•Dimension: 482mm x 44mm x 240 mm (WxHxD)