簡體 繁體 english menu
  • ABOUT
  • Products
    • Home Installation
      • Multi-Room Amplifier
      • Power Amplifier
      • Controller
      • Media Player
      • Volume Control
      • Power Management
      • 2.4G Wireless System
      • Solution Boxes
      • Speaker Selector
      • Speaker
    • Intelligent Conference
      • Two Channel Power Amplifier
      • Integrated Controller
      • Four Channel Power Amplifier
      • Professional DSP Karaoke Amplifier
      • Power Amplifier w/Dante Interface
      • Console Mixer W/Digital Effects
      • Digital Audio Matrix
      • Digital Speaker Management
      • Professional Karaoke Processor
      • Digital Feedback Eliminator
      • Power Controller
      • DC Power Distribution
      • Broadcast Conference Microphone
      • Wireless Conference Microphone
      • Full Range Speaker
      • Professional Subwoofer
      • Coaxial Monitor Speaker
      • Line Array Loudspeaker
      • Line Array Subwoofer
    • Pro Audio
      • Mixer
      • Headphone Amplifier
      • Guitar Tool
      • Mini Mixer
      • Direct Box
      • Mic Preamp
      • Phantom Power Supplier
      • Other Solution
    • Public Address
      • Amplifier
      • Speaker Selector
      • CSP Transceivers
      • CSP Receivers
      • Solution Boxes
      • Matching Transformer
      • Professional Meeting Microphone
      • Dante
  • NEWS
  • SERVICES
  • CONTACT
UBR-1211A





Mobile Single Receiver (Active)




UBR-1211A


Mobile Single Receiver (Active)

UBR1211A module is designed to receive a single pair of Audio signal from CSP products, and transfers the signal to the Balanced or Unbalanced Audio Output on the front panel. Set the switch on the front panel to determine which pair of UTP CAT 5 cable to receive the signal and goes to the output of this module. 
 
UBR1211A module only receives one pair of CAT5 cable by setting the switch, this means UBR1211A accepts 3 pairs of signals from other CSP transceivers to RJ45 Input jack, the additional CSP Receivers could be chained to the LOOP OUT jack. The other two single pair of CSP receivers could be chained together with UBR1211A, or a single two pair of receiver could be connected. By using same pair of CAT5 cable, the additional CSP receivers could be chained together to distribute same signal to different locations.
 
UBR1211A module could be powered from a 24VDC power supply by using terminal block or DC jack on the front panel, and the power also could be provided to all the connected modules by Pair D. UBR1211A may be powered from other modules through the Pair D of TP CAT5 cable. When the power is supplied to this module, front panel LED will light on.

Features

•Balanced or Unbalanced Audio Outputs
•With 3 x Twisted Pair Input Selector
•Signal and Power Loop Out
•Selectable which Pair (A, B or C) Feeds the Output
•Powered by Terminal Block or 24V DC jack or from RJ45 Jack
•Provides the power to all Modules Connected to RJ45 Jacks
•Blue LED Indicates Module is Powered
•Daisy chain topology

Specifications

•Input: CSP UTP RJ45
•Connection: RJ45
•Twisted Pair Used: A, B, C pairs
•Outputs: 150 Ω Balanced; 1K Ω Unbalanced
•Output Connector: Detachable Terminal Block (Balanced) ;RCA Jack (Unbalanced) 
•Output Level: +4 dBu , +22 dBu Max. (Balanced);-10 dBV (Unbalanced)
•THD+N: < 0.005%
•Frequency Response: 20 Hz ~ 20 KHz
•Power Requirement: 24 VDC @ 35 mA; 155 mA (Max.)
•DC Power Connectors: DC Jack, Detachable Terminal Block(2Pin), RJ45
•Dimensions: 76mm x 40.6mm x 38.1mm (WxHxD)

Documents